Make sure to always keep it wet, and follow up with a rubbing compound. Start with the scratch and then blend it in. Determine the direction of the grain and start sanding in one direction only, following the brushed pattern. If you need to use a courser-grit paper to remove deeper scratches, follow up with a finer grit, and then finally a rubbing compound.
After removing scratches and unwanted marks, you can then clean and polish your stainless-steel appliance. With a clean microfiber cloth, wipe down the newly sanded surface. This will remove sanding and metal dust, as well as leftover polishing compound or water. For best results, spray the surface of the metal with several sprays of vinegar, and then pull out another clean microfiber cloth to wipe the metal.
The vinegar will clean the surface and remove all traces of other compounds and cleaners. Once the stainless steel is clean and dry, start polishing. Apply a few drops of oil to a clean microfiber cloth. Going against the grain can actually cause more damage to a stainless-steel surface. Some are sold as powders that need to be mixed with a few drops of water to form a paste, while others already come in paste form.
Non-gel toothpaste can be used as-is, and baking soda can be mixed with water until a pasty consistency is reached. Cookie banner We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audiences come from.
By choosing I Accept , you consent to our use of cookies and other tracking technologies. How to Remove Scratches from Stainless Steel. By Nancy Fann-Im. Pinterest Email Pocket Flipboard. Assess the Damage and Gather the Materials Are you dealing with light, minor scuffs or deeper, visible scratches?
What You Need for Small Scratches For less significant nicks and dings, all you need is a non-abrasive, stainless-steel scratch remover compound, which will work to fill in the fine lines and smooth out the surface. If using a cream-based compound, apply it to a microfiber cloth, rubbing it back and forth along the grain.
Once the scratch is buffed out, wipe with the cloth to remove any residue. Use another microfiber cloth to dry the surface and repeat the process until the scratches are completely removed. Toothpaste : If you need a slightly more abrasive approach, apply a whitening toothpaste to a soft-bristle toothbrush. If necessary, keep brushing and add more toothpaste.
Once the scratch is gone, clean the area and finish the surface. Share This Post With Others! Related Posts. Gas vs. Electric Range: Which Is Better? October 27th, How to Maintain a Wolf Range. October 12th, September 30th, September 8th,
0コメント